Edible oil purifier equipmentwith pressure filtration or vacuum evaporation - pressure
filtration to remove solid impurities are not pure oil and water
filtration unit. Oil purifier equipment is mainly used to improve
the purity of electrical insulating properties of oil and
Centrifugal oil filter, also known as centrifugal filter, oil
purifier. Its main function is to filter the contaminated oil,
purification, restore or improve the properties of the oil itself.
Including oil cleanliness, moisture content, air content, acid
value, kinematic viscosity, flash point, insulation levels, colors
and so on.
FIRST centrifugal oil filter is simple, the effect is significant.
In its interior there is a double jet nozzle rotor, only the
pressure generated by the oil which is provided with a driving
force. After the device is turned on, the fuel tank by pump oil
delivered to the rotor, the rotor after standby oil filled spray
nozzle along the lower part of the dial, subsequently generating a
driving force to make the high-speed rotation of the rotor. Its
speed can reach 4000-6000r.pm above, the power generated is at
least 2000 times gravity to be directly driven by the principle of
centrifugal force is separated from the impurities in the oil. Hard
and sharp metal wear resistance of the material, coupled with those
who make the parts for wear or deterioration of residual deposits
of oil, even as the size of 1μm can also be removed. Separation of
impurities attached impurities collected in the rotor cover, just
regular cleaning can be. Further, since a large proportion of water
than oil, under the effect of centrifugal force, the water
separated from the oil product of the presence of the inner rotor
from the oil pan, can be removed only when washed. Oil filtered by
gravity directly back into the tank.
1, the oil needs. Such as insulating oil, in order to achieve a
high insulation value through high-precision filter, and a large
modulus gear requirements on impurities is much more extensive.
2, the viscosity of the oil. High-viscosity oil can not be passed
through a fine filter, the accuracy needs to be reduced.
If the one-sided emphasis on cleanliness and the use of
sophisticated oil filter, oil filter will increase the operating
costs of the device.
(1) oil filter cartridge often blocked, require frequent cleaning
or replacing the filter. ~ ~
(2) increasing the axial compression, so that the oil can quickly
through the filter, but often will therefore crushed filter.
(3) the addition of the preheating tank, increasing the temperature
to reduce the viscosity.
In general, fine filter stage filtration precision choice for:
(1) insulating oil, selected 1 ~ 5μm.
(2) 46 # less oil, turbine oil, selected 10 ~ 20μm.
(3) engine oil, gear oil selected 20 ~ 50μm. More Consulting